Tc-electronic NDR-1 Nova Drive Bedienungsanleitung PDF herunterladen (Seite 17)

NOVA DRIVE & G-SWITCH

bank covered by G-Switch (A1/A2/A3; B1/B2/B3;

C1/C2/C3 etc.)

Bank Mode

• Use the two switches on NOVA Drive to switch to

the previous or the next preset bank.

• Use the three switches on G-Switch to select one of

the three presets in the currently selected preset

bank.

Active or Bypassed

To activate one of the three presets in a bank, you

simply press one of the three switches. The NOVA

Drive display indicates the current bank and preset as

shown above.

To bypass NOVA Drive when G-Switch is used, simply

press the switch on G-Switch corresponding to the

currently used preset. This is the same as having three

regular drive pedals (per bank).

Example – Normal Mode:

• Set NOVA Drive to Normal Mode using the

SWITCH MODE button.

• Select a preset bank/range using the PRESET

encoder. E.g. select 1.

• Press switch 2 on G-Switch. The display now

indicates “2”, and ( provided that either distortion,

overdrive or both sections are active in this preset)

the OVERDRIVE and/or the DISTORTION LEDs

will be lit.

Preset # OD - active OD - inactive

• Now press switch 2 on G-Switch again. You’ll see

the section LED(s) turn off, as you have now

bypassed NOVA Drive.

Even when an effect section is bypassed, its

settings are stored as part of a preset.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 25 26

Keine Kommentare

Tc-electronic NDR-1 Nova Drive Bedienungsanleitung Seite 17