Tc-electronic M2000 Bedienungsanleitung PDF herunterladen (Seite 8)

THE REAR PANEL

Main

Power

Switch

Balanced

XLR

Inputs

Balanced

XLR

Outputs

Serial no.

AES/EBU

Digital

in/out

S/PDIF

Digital

in/out

MIDI

In,Thru,Out

Pedal

Input

Notes:

To accomodate International regulations, we have also added a back panel power switch.

You don’t need to use the power switch on the rear panel. Use the front panel power switch instead.

Remember to use the left input when you’re using only one input.

Pin 2 is »hot« on all XLR’s (AES Regulations).

If You are connecting the M2000 to unbalanced equipment, you must tie pins 1 and 3 together in the cable

ends away from the M2000.

We have reserved the two unused pins on the MIDI connectors for an optional RS485 interface. Therefore, if

you are connecting M2000 to other equipment that use these pins, please make sure the cable is a 3-wire

standard MIDI type, and not a five wire MIDIPLUS type.

If you want to use the pedal input, be sure it is a momentary »make« type.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 36 37

Keine Kommentare

Tc-electronic M2000 Bedienungsanleitung Seite 8